Support Chips:
l NEC ALL FLASH series 8/16/32bits MCUs;
l Renesas R8Cxx and M16Cxx series MCUs;
l New chips support comes from Renesas Electronics (Future Upgraded).
Features:
l USB communication interface;
l On-Line and Off-Line Programming, Support Socket, On-board and In-System programming;
l 3.3V or 5.0V voltage select to match different voltage level;
l UART,CSI,CSI+HS, programming mode select (For NEC chips), and 2-Line or 7_line programming mode select (for Renesas Chips);
l Data encrypted function and downloaded data integrity check.
l Remote programmer management, through client application software, customer can download the encrypted data to programmer to update the data or S/N and Programmable number setting;
l Support Serial No. function, 4 or 8 Bytes could be used or could be customer defined. The position in flash memory of S/N could be user defined by PC application;
l Support Programmable Number control, i.e., user can set the maximum number of this programming, once the counter number is arrived, the programmer will be stopped and could not be programmed again, unless new number is set or this function is disabled by PC application. This is very useful for solution provider;
l Auto-Chip detection, the programmer could automatically detect the chip connection and start the programming without pressing the programming key;
l On-Line firmware upgrade to support new chips.
|